Subsystem: Hewlett-Packard Company Device 1609įlags: bus master, 66MHz, medium devsel, latency 0Ĭapabilities: HyperTransport: Slave or Primary InterfaceĬapabilities: HyperTransport: UnitID ClumpingĬapabilities: HyperTransport: Retry ModeĠ0:01.0 PCI bridge: Hewlett-Packard Company Device 9602 (prog-if 00 )įlags: bus master, 66MHz, medium devsel, latency 64īus: primary=00, secondary=01, subordinate=01, sec-latency=64 Is it possible to load usb 3.0 drivers or I need a new simple usb 3.0 PCI-e card (not ~]# lspci -vĠ0:00.0 Host bridge: Advanced Micro Devices RS880 Host Bridge The first is my last PCI card added - its a multiport usb 3.0 + eSATA, and as I see the usb 3.0 driver is not loaded (on the second controller are loded both the SATA and IDE drivers 03:00.0 and 03:00.1). and 03:00.0 SATA controller: JMicron Technology Corp.
I got this long list, with two SATA controler 02:00.0 SATA controller: ASMedia Technology Inc. One thing I have not worked out in 6.x yet is how to load a module when another one is being used in its place without blacklisting it and I'd be nervous of blacklisting the ahci module as it is used all over the place. Does your card have an extra BIOS? This should show up briefly during the boot up sequence and possibly tell you what key to press to get into it. Some of the motherboard ones say to disable the Legacy USB option.
I've seen some posts on the internet with problems with the chip. The best you can do here is a "yum update" then reboot to the latest kernel (although yum update may be playing up at the moment so you may need to do just a "yum update kernel*") ClearOS comes with one but I can't see which devices it is compatible with, and I don't know how to track down a later one other than updating the kernel, which is not much of an option. Can you do a: lspci -n | grep 02:00This will give you the Vendor ID and Device ID which should help with research.įrom what I've seen on the internet you may need the xhci_hcd module (or perhaps the xhci module). I'm not sure how much more I'm going to be able to help you here.
0 kommentar(er)
